Netcom 123 Wifi

Beschrijving
Specificaties

1 port RS232/422/485 DB9 to TCP/IP and IEEE 802.11b/g

NetCom 123 Wifi is an industrial-strength network-based serial device server for connecting one RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to a network running TCP/IP. This network may be based on 10/100Mbps Ethernet or Wireless LAN as of IEEE 802.11b/g.
NetCom 123 Wifi provides completely secured communication for configuration and to the attached serial device, this is implemented by openVPN tunnel software.
In addition to allowing serial devices to get networked, any host (PC Server or Workstation) without network access can also access remote serial device via adding NetCom devices to the existing serial port. NetCom 123 WLAN can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation.

Processor	ARM 9 166 MHz
I/O controller	16C950 or compatible
Memory	16MB SDRAM, 2 MB Flash
Connector type	SMA-Reverse for WLAN antenna, RJ45 for Ethernet, DSUB 9 male for serial Port
WLAN interface	Wireless LAN IEEE 802.11b/g, max. 54 Mb/s Encryption WPA2-AES, WPA-PSK/TKIP, WEP-128, WEP-64 Infrastructure mode (uses an Access Point) Ad-hoc mode (direct connection to a PC/Laptop)
Ethernet interface	Auto-detecting 10BaseT/100BaseTx
Protocols	TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS
Serial interface	RS232/422/485 selected by software or DIP-switch
No. of port	1, Speed up to 3.6 Mbps
Available Modes	RS232 full duplex RS422 full duplex RS485 4 wire, full duplex RS485 2 wire, half duplex, with echo RS485 2 wire, half duplex, without echo
Signals	RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND RS422: Tx+/-, Rx+/-, GND RS485 2 wire: Data+/-, GND RS485 4 wire: Tx+/-, Rx+/-, GND
Speed	RS232: up to 500 kbps RS422/485: up to 3.6Mbps
Parity	None, even, odd, space, mark
Data bits	5, 6, 7, 8
Stop bits	1, 1.5, 2
IRQ	None
I/O address	None