6645

Netcom Plus 113

+Verzendkosten kg
  • Beschrijving
  • Specificaties

  • 1 port RS232/422/485 DB9 to TCP/IP

NetCom Plus 113 is an industrial-strength network-based serial device server for connecting one RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.
In addition to allowing serial devices to get networked, any host (PC Server or Workstation) without network access can also access remote serial device via adding NetCom devices to the existing serial port. NetCom Plus 113 can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation.
New: The serial connector is pin-compatible to Com1 on a PC, as DB9 male. The RS232 Null-Modem Adapter is no longer required.

The power consumption of NetCom Plus 113 is very low, supply via Ethernet is available. See the option, read background information, or check an adapter.

Processor

ARM 7 TDMI 50MHz
I/O controller

16C550C or compatible
Memory

8MB SDRAM, 1 MB Flash
Connector type

RJ45 for LAN, DSUB 9 female for serial Port
LAN interface

Auto-detecting 10BaseT/100BaseTx
Protocols

TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
Serial interface

RS232/422/485 switchable
New: Connector DB9 male, not female
No. of port

1, Speed up to 460Kbps
Available Modes
  • RS232 full duplex
  • RS422 full duplex
  • RS485 4 wire, full duplex
  • RS485 2 wire, half duplex, with echo
  • RS485 2 wire, half duplex, without echo
Signals
  • RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND
  • RS422: Tx+/-, Rx+/-, GND
  • RS485 2 wire: Data+/-, GND
  • RS485 4 wire: Tx+/-, Rx+/-, GND
Speed

up to 460Kbps
Parity

None, even, odd, space, mark
Data bits

5, 6, 7, 8
Stop bits

1, 1.5, 2
IRQ

None
I/O address

None